Circle View with Direct Connectors (App to App) Part 2

Dear John, hoped you have an excellent trip last weekend. I tried several times to load Question 2 up to the existing discussion (part1). But it seems to ignore my uploads. So I opened the other issue. I solved the angle start with your solution works fine. Thank you for that. Close on the issue and open a new one. I tried to set an arc with the start point, That works, then I calculated the angle of the arc from application 885 to 718. But it doesn't have the same coverage area. Something I don't understand. Maybe you have an idea. (See jpg and file)
Regards
Andy

Hi Andy,

Unfortunately both of your files are not yet attached to your comment. Both say "(Processing Asset)". As a result I can't download them.

This happened to me once. The assets finally showed up, but it took days. Could you try responding to this message and try to reattach both files? If that doesn't work, you can just send them to me via email. I am john at cartania dot com.

Update the Picture!

Hi Andy,

There were a few minor problems which I fixed. The main issue is that you had two angles attached to the arc node. But the arc node, unlike the angle node, wants just one angle, the starting point, and the width of the arc in degrees. To get that width you just have to subtract the two angles.

I am going to try to attach the revised NodeBox network and a screenshot. If that doesn't work I will mail them to you.

John

Dear John, I don't know what I should say. I tried hours to solve the problem. I was even 80%-90% to your solution. But there is a reason why there are masters and students. Thank you very much for your help, now I could move forward. I wish you a great weekend. You made my day! Thx and regards :-)
Andy